Transforming

One of my friend’s is very clever at finding the BEST things in op shops.  Before op shopping became ‘trendy’ and when op shops were quite ordinary, in terms of display (now they are often like department stores) and odour (some could be considered musty! – for want of another word) my friend looked for bargains.  She has a good eye for sussing out treasures – not so much clothing, but crockery, great books, vases, etc etc – you name it – she has probably found it!   When she was going through her mosaic phase, she delighted in what she could buy and then take home to break up (destroy) for her art works!

Fortunately for me, I have on occasion, received a little gem from her. A month or so ago I was the recipient of one of her finds. Guess what it was??

StartYes! It was a large pincushion- about 6 inch diameter, covered in an upholstery furnishing fabric, with varnished base in dark brown.   I could see the possibilities in renovation!

Starting to undo

I had to unpick the braid around the fabric. Take out the millions of staples to find out what was underneath.

Nearly there

I decided to stay with the foam inner, as it had a good shape and was fine for reuse.

undone

‘Roughing up’ (I’m sure there is a technical term for this!)  the old varnish to start applying some white paint took some time.  Then repainting it with several coats.

underside

I love the ‘distressed’ look – so back to the sandpaper I went to make some marks ‘of wear’.

Then the fun part started of looking for a suitable fabric to recover it with.  I chose a Kaffe Fasset from my stash and some ribbon that went with it.  A retro button was found for the centre, and attached with Aurifil Ne 12 (see all sorts of using for the thread!).

Top of Pincushion

Da ta!!!  I am very happy with the end result – and won’t lose this one in the sewing room!

Finished

Hoopla!!

The staff at Always Quilting recently discussed using embroidery and quilting frames to display textile work. Embroidery and stitcheries, applique, pieced items and quilting, even a pretty piece of fabric can all be displayed this way. A quick internet search gives you lots of inspiration! Indeed, I was inspired and have since made a couple of items which are displayed in inexpensive embroidery hoops.

For my first piece, I decided to engage in some English paper piecing and fussy cutting and make a small companion piece for a mini quilt made last year and which I blogged about in a previous post. https://alwaysquilting.wordpress.com/2014/11/28/always-playing…-fussy-cutting/  You might recall that there was not much fabric left, but certainly sufficient for my purpose.

sewing- blog Nov 2014 058

Plenty of holes, but still enough fabric for my project!

I used 4x 2-inch clamshells and fussy-cut my fabric, with a small circle as the centre. There are many methods of preparing your English paper pieces, from tacking, to glue-basting, to fusible papers. I discuss one method here. https://alwaysquilting.wordpress.com/2013/02/22/english-paper-…agons-and-more/  When using clamshells, I prefer to tack the paper in place as this gives me greatest control over the curve, ensuring it is nice and smooth. When it is tacked into place I give it a good press.

Hoopla blog 015-crop

Tacking the fabric onto the clamshell paper.

Once I had made my clamshells I appliqued them onto my background fabric using Aurifil Cotton Mako 50. As you can see in the photo, I left plenty of fabric around the edges. I then took my little hoop, in this case 5 inches in diameter, and centred my design in it. When I was happy with its placement I tightened the screw so that the work was tensioned with no wrinkles.

 

Hoopla blog 004

Ensure the item is centred in the hoop.

I trimmed the background fabric to a border of about 1 1/2 inches.

Hoopla blog 005-crop

Trimming excess fabric to 1 1/2 inches.

I took a strong thread (Aurifil Cotton Mako 28) and ran a gathering stitch around the perimeter. To make this job easier I did not cut my thread off the spool, but used it directly from the spool. This way could adjust it as required, and I didn’t run the risk of miscalculating the length of cotton I needed, or of accidentally pulling the gathers out. When I had the gathers sitting as I wanted, I cut the threads leaving a tail, then tied them in a reef knot to secure them.

page

Gathering the background fabric behind the hoop.

To cover the back of the hoop I cut a circle of felt, using the hoop as a template for the circle. I wanted the felt to fit just to the edge of the blue background fabric, but inside hoop. Finally I stitched the felt in place again using a strong thread, Aurifil Cotton Mako 28. I used an overstitch going from the felt out towards the edge of the hoop as shown in the photo, and I ensured that each bite into the felt was about 3mm and went into the blue background fabric each time.

Hoopla blog 011-crop

Stitching the felt back into place.

And my little project is finished and ready to hang on the wall!

Hoopla blog 016-crop

My little hanging all ready to display on the wall.

In a future post, I will write about another project framed in this way.

 

A Special Treat to Banish the Cold

It is always a special treat when a customer brings a project that they have stitched with Aurifil into the store for “show and tell”.

windflower-scarf

This delightful scarf has been designed by Jan at Windflower Embroidery.

It is just perfect for those wintery days that we are experiencing, a lovely soft angora wool background trimmed with wool applique autumn leaves embellished with Lana wool thread.

Just the description is enough to banish the chill air.

windflower-scarf-detail

Jan has heaps of information, including an Embroidery Stitching Guide for free download, on her Windflower Embroidery website.  Well worth a visit.

If you want to work your own winter embroidery with Lana wool thread, visit our Aurifil Thread Australia website to find a local retailer.

Read more information about Lana wool thread.